![](https://www.srtunisie.com/wp-content/uploads/2019/07/sp-234-glitter-base-365810622639887-80x80.jpg)
Sp 234 Glitter Base – WB
16 August 2019![](https://www.srtunisie.com/wp-content/uploads/2019/07/flock-adhesive-wb-3645937a2e5ba92b-80x80.jpg)
Sp 237 Flock Adhésif – WB
16 August 2019Sp 236 Foil Adhesive – WB
Description
Maximum brightness and high washing resistance
Physical – Chemical Properties
Appearence | Transparent Paste |
pH | 6.5-7 |
Density(g/cm 3) | 0,99 |
Type of Fabric | 100% coton et mélanges coton-polyester et 100% polyester |
Screen | Maille de 43 cm / 110 pouces soie 70 microns |
Squeegee | 57-62 Shore U Type |
Curing | 160 o C / 320 F – 1,5 minute |
Press | Hand Press: 160 o C – 4 bars – 15 secondes |
Continuous Press | 160o C- 4 bars – 15-20 secondes |
Washing | 40 o C / 104 F – 1200 rpm – 5 Washings (Inside Out) |
Cleaning of Screen | Water and Sponge |
Application
To obtain the best brightness and washing resistance from SP 236 Foil Adhesive – WB it is important to use foil with high qualityAfter printing SP 236 Foil Adhesive – WB on the fabric, it should be curedWhen the curing is completed, the foil is pressed on the print to obtain foil effectTo remove the foil from the printing surface, it is necessary to wait until the printing surface is getting coolTo reduce viscosity SP 209 Regulator – WB (1-3%) can be added
Safety And Storage
It does not contain harmful substances for inhalation and skin when used. However in case of contact tosensitive organs, such as eyes or mouth wash with plenty of water. If necessary, medical assistance is advised.Keep containers dry and tightly closed. Store in a ventilated place between (+5)-(+30) °C/(+41)-(+86)˚F oftemperature.It should be consumed within 12 months after the production date.
Packing
8 kg à 30 kg
1 Gal – 5 Gal
Reviews
There are no reviews yet.